INSTRUCTIONAL ZONE

>
Instructional

Oxorganic Permanent Smoothing Treatment

BEFORE STARTING THE TREATMENT!
Please be sure to contact our expert team directly at:
Email: info@oxoorganic.com | WhatsApp: Click Here | PM us on Facebook

THE PROCESS

Step-by-Step

OXO Organic

Hair Treatment
Guide.

7 EASY STEPS

FOR THE PERFECT RESULT.

STEP 1:

Hair Diagnosis and Shampoo

1. Determine the hair type for
treatment timing of the process and
flat iron work.
2. Shampoo hair 100% with OXO
Pre-Treatment shampoo.
3. Dry Hair completely.

* it is recommended not to color or bleach

the hair before the treatment. In case the
hair is bleached use OXO Silver spray to
protect the color.

HAIR TYPE
APPLICATION
WAITING
TIME
Natural
Apply evenly to
the entire hair
60 min
Under Heat
Thick /
Strong and Curly
Apply evenly to
the entire hair
Thick /
Strong and Curly
Thin
Apply evenly to
the entire hair
60 min
30 Min Under Heat
30 Min Without
Heat

IMPORTANT NOTE: Do not apply the treatment directly onto the scalp.

STEP 2:

Applying the Treatment

Divide hair into 1.5 inch sections and hold each section at a 90° angle from the 
scalp.

Use a tinting brush to apply OXO about 0.5 inch away from the roots, avoiding the scalp.

This precaution helps prevent any potential tingling or itching reactions due to unknown allergies or sensitive skin. 

Distribute the treatment evenly through the hair’s length using a rattail comb, avoiding contact with the scalp. Apply any excess product on the comb to the hair close to the scalp. 

Lastly, check the areas around the neck and ears to ensure no residue is left on the skin. If any residue is found, gently clean it off with a damp cloth.

STEP 3:

Waiting Time

The waiting time varies based on the client’s hair type and desired level of deepening.
Recommended time guidelines for different hair types can be found in Step 1.

STEP 4:

Thoroughly Shampoo to Remove Treatment

Rinse with warm water to completely remove the OXO treatment. Use OXO Purifying
Shampoo to thoroughly remove the treatment.
Repeat this process with OXO Purifying Shampoo for a second wash until both the
scalp and hair are completely clean.

STEP 5:

Thoroughly Dry the Hair

Ensure the hair is completely dry before moving on to the next steps to prevent steam burns while using the flat iron on damp hair. 

STEP 6:

OXO Flat Iron Method

1. Divide Hair into Four Sections: Separate the hair into 4 equal parts.
2. Create Thin Rows: Section a straight row about 0.5 inches wide.
3. Set OXO Organic Flat Iron: Heat the OXO Flat Iron to its maximum
temperature: 238°C (460°F).
4. Position and Insert Hair: Gently pull a hair row using a clip comb at a 90° angle. Insert it into
the flat iron close to the scalp (without touching). Close the iron gently and keep it on the section
for 5 seconds. Repeat each section twice with a new section in between.
5. Completion Check: Identify section completion by its appearance, aiming for maximum shine.

OXO Organic

Flat Iron Method

1. Aim for Maximum Shine: Strive for the highest level of shine.
2. Start Testing on the First Row: Begin with the first row as a test.
3. Handle Curly Ends: Straighten curly ends thoroughly.
4. Treat Damaged Ends Lightly: For damaged ends, gently iron 4–7 times to close the cuticle
and achieve desired shine.
5. Handle Damaged, Fragile, Brittle Hair: Work smoothly from top to ends without remaining
on hair sections.
6. Overlap Between Sections: Ensure smooth movements from section to section to cover all
areas.

STEP 7:

Wash & Go

Color or Highlight Hair Right Away: If desired, you can color or highlight
the hair immediately after flat ironing.
Post-Treatment Care:
If not coloring, rinse with water and apply an OXO
Organic hair mask for 5–10 minutes.
Rinse off the mask and fully dry the hair to see the
results.
If you observe any remaining waves, you can use
the flat iron again, without applying the
OXO treatment.

Essential Products:

Hair Transformation.

New Generation

Formula

Experience the latest generation
in smoothing treatments with a
safe and permanent solution from
OXO Organic.

Say goodbye to fumes and toxins as
you upgrade your lifestyle and work
confidently using our innovative
formula.

Customer Service

info@oxoorganic.com

Play Video

STEP 2 Apply Treatment (convert centimeters into inches)

  1. Part a small row of hair (about 5 cm in width) holding it at a 90° angle from the scalp.
  2. Using a tinting brush, apply OXO at about 1 cmfrom the roots avoiding contact with the scalp, which may produce a tingly or itchy reaction to unknown allergies and sensitive skin.
  3. Without touching the scalp use a rat tail comb to apply the product on the entire length of the hair.
  4. Put the remaining product on the comb to apply on the hair close to the scalp.
  5. Check the areas around the neck and ears to be sure that no material is left on the skin. If so clean it out with a wet cloth.

STEP 3 Completely Remove Treatment

  1. Rinse with hot water to completely remove the OXO treatment.
  2. Then use OXO Purifying Shampoo to wash (yes, wash, not just rinse) the treatment product out of the hair.
  3. Repeat, using the OXO Purifying Shampoo to wash the hair a second time until the scalp and hair are completely clean.
  4. Dry the hair completely with blow dry
Play Video
Play Video

STEP 4 OXO flat iron method

  1. Divide the hair to 4 even sections. (convert centimeters into inches).
  2. Part the hair in a thin straight row (about 5 cm in width).
  3. Make sure the OXO flat iron is on MAX heat 238c 460F
  4. Using a clip comb at a 90° angle, grasp a row of hair, pulling (not yanking) until there is tension and insert the row into the flat iron, placing the flat iron as close to the scalp as possible without touching it. Without pressure close the iron (do not squeeze) on the hair, remain (without moving) for 5 seconds on eace hair section and repeat the same section 2-3 times.
  5. How do you know when ironing a section is completed?
Look for that maximum shine.
  • Start working on the hair, using the first row as a test row.
  • Complete five seconds of ironing and check the shine.
  • Repeat ironing each section until maximum shine appears at the root, and along the length to the ends.
  • If the ends of the hair are curly, iron well.
  • If the ends are damaged, iron lightly only about 4-7 times, until the cuticle is closed and the hair has the desired nutrient shine.
  • In case of badly damaged hair, without curl, lower the temperature by 1-2levels, depending on hair condition.
  • If hair is Damaged/Fragile/Brittle/Dyed/Bleached/Blonde hair: start bygently ironing for 15 seconds, if you achieve shine, STOP. If not, continue for another 15 seconds, or until you achieve shine and closecortex.

How do you know when ironing a section is completed?

  • Look for that maximum shine.
    • Start working on the hair, using the first row as a test row.
    • Complete five seconds of ironing and check the shine.
    • Repeat ironing each section until maximum shine appears at the root, and along the length to the ends.
      • If the ends of the hair are curly, iron well.
      • If the ends are damaged, iron lightly only about 4-7 times, until the cuticle is closed and the hair has the desired nutrient shine.
      • In case of badly damaged hair, without curl, lower the temperature by 1-2levels, depending on hair condition.
      • If hair is Damaged/Fragile/Brittle/Dyed/Bleached/Blonde hair: start bygently ironing for 15 seconds, if you achieve shine and close cortex, STOP. If not, continue for another 15 seconds, or until you achieve shine and closecortex
Play Video
Play Video

STEP 5 Tips for Success

Critical for straightening the hair is keeping the flat iron closed
maintaining a tight tension and the right temperature throughout.

STEP 6 Assess the results for corrections

No need to worry!

While the customer is still in your salon repeat the flat iron process if you missed a curl or a puffy section.

If a correction is needed on another day re-apply OXO and perform the treatment (only on the sections which need correction).

Re-applying OXO performing a correction has no danger, however, it is not recommended to straighten the hair more than 3 times in one year.

Play Video
Shopping cart0
There are no products in the cart!
Continue shopping

Iron each section separately and slowly with a constantly closed iron.This allows the heat to penetrate the hair.
Alwaysbe sure to insert the thin, neatly combed rows into the iron while it is pulled tight and neatly combed. to work in thin combed rows.
If the row is loose or tangled, stop and re-comb the hair.
If there is no tension and the hair “dances” in the iron, the hair will not straighten. Repeat until achieving maximum shine and full closure of the cortex. (We call this iron movement “cooking” and not “milking” of the hair.

If the hair stylist or the customer is concerned, we recommend doing a test row before deciding to proceed.

Hair color lightens up to two times after the treatment.

Any brand of color can be used.

White Hair

Due to the reaction between the amino acids and the heat of the iron, white hair might take on a yellow hue. White hair will straighten completely, but it might take quite a while before the yellowing fades.

 

PLEASE work according to our white hair instruction guide

Lightened Blonde Hair

A change in hue is possible during use of the flat iron, will fade after each shampoo, completely disappearing within about two weeks.

To avoid the change of hue please apply sliver spray after shampooing anf before using the flat iron.

 

Registered Users